iPhone 12/13/14 series and iPhone 15 / 15 Plus:
Before you start installing one of our screen protectors, make sure that you're in a dust-free environment with bright lighting.
Clean your display with the alcohol wipes and then dry it off immediately with the microfiber cloth. If you notice any streaks, just clean it again and make sure to dry it off quickly. If you see any dust on the display, use the dust removal stickers to pick it up.
Once your display is spotless, grab one of the screen protectors. Use the red pull tab to peel off the protective film and keep this side facedown so that no dust particles land on it after you peel off the film.
Hold the glass using the tabs on the top and bottom. You can then align it around the earpiece speaker. Before placing it down completely, just make sure there is equal spacing between the edge of the glass and the edge of your device on all sides.
Now that it’s lined up, run your finger down the center of the glass and watch as it begins adhering from the center all the way to the edges. If you happen to notice any bubbles, press firmly using the microfiber cloth and sweep the bubbles out towards the closest edge.
To finish, simply grab either the top or bottom tab and peel off the top protective film!
iPhone 15 Pro / 15 Pro Max:
Before you start installing one of our screen protectors, make sure that you're in a dust-free environment with bright lighting.
Clean your display with the alcohol wipes and then dry it off immediately with the microfiber cloth. If you notice any streaks, just clean it again and make sure to dry it off quickly. If you see any dust on the display, use the dust removal stickers to pick it up.
Once your display is spotless, grab your iPhone 15 Pro / Pro Max. Notice that the display has a very slight curve around the border. Turn the display on so that you can use the active area as an alignment guide. A white background will be most helpful, and we also recommend setting your iPhone's auto-lock timer to "never" so that the screen doesn't turn off in the middle of the installation.
Grab one of the screen protectors. Use the red pull tab to peel off the protective film and keep this side facedown so that no dust particles land on it after you peel off the film.
Hold the glass using the tabs on the top and bottom. You can then align it perfectly against the active part of your display.
Now that it’s lined up, run your finger down the center of the glass and watch as it begins adhering from the center all the way to the edges. If you happen to notice any bubbles, press firmly using the microfiber cloth and sweep the bubbles out towards the closest edge.
To finish, simply grab either the top or bottom tab and peel off the top protective film!